Renault Master year of production 2024 - 2.3 Dci 160km SID321 Stage 1
The new Renault Master 2024 2.3 dCi 160 HP is one of the most frequently chosen models among commercial vehicles in its class.
Great ergonomics and an economical engine go hand in hand with durability, but as with many commercial vehicles, the factory power is not always enough , especially when fully loaded or driving on the road.
That's why we performed a Stage 1 modification for this unit, based on the Bosch SID321 controller, which improved both performance and comfort of daily work.
Vehicle details
| Parameter | Value |
|---|---|
| Model: | Renault Master L3H2 (2024) |
| Engine: | 2.3 dCi |
| Factory power: | 160 HP / 400 Nm |
| After Stage 1 modification: | 200 HP / 440 Nm |
| Increase: | +40 HP / +40 Nm |
| ECU controller: | Bosch SID321 |
Scope of work carried out
During tuning, we performed a full analysis of ECU data and dynamic logs to ensure maximum effect with full unit safety .
As part of the modification:
-
⚙️ We have optimized the torque and boost maps ,
-
🧩 We have adjusted the fuel and boost dose limits ,
-
🔧 We have improved the operating characteristics in the lower rev range ,
-
🔥 We have maintained full temperature safety (EGT) and factory diagnostic protection.
We prepare each Stage 1 file for the SID321 controller individually based on the reading of the original software and measurements from the Dynomax / Dynomet dynamometer.
Modification effects
-
🚚 Significantly better flexibility under load,
-
⚡ Significantly stronger mid-range revs,
-
🧭 Easier starting and smoother acceleration with a load,
-
🔧 Safe operation of the engine and gearbox,
-
⛽ Possible slight reduction in fuel consumption when driving on the highway.
The car has gained dynamics that allow it to be driven comfortably even when fully loaded , while maintaining high drive durability.
Why Stage 1 for the Renault Master 2024 is a good choice
The modern Continental / Visteco SID321 controller offers extensive calibration options, but requires experience and knowledge of the software structure.
Unlike universal solutions, our chip tuning files are developed individually – maintaining full HW/SW compatibility and safe torque values.
Stage 1 version is:
-
✅ Safe increase in power and torque,
-
✅ No risk of OBD errors,
-
✅ Full compatibility with DPF, SCR, EGR systems,
-
✅ Perfect solution for fleet and commercial vehicles.
Summary
✅ Renault Master 2024 2.3 dCi 160 HP
✅ Driver: Bosch SID321
✅ Modification: Stage 1 – 200 HP / 440 Nm
✅ Gain: +40 HP / +40 Nm
✅ Measurement: Dynomax / Dynomet dynamometers
✅ Completion time: 30–40 minutes
✅ Individual Stage 1 file based on professional chip tuning files
📩 Do you want to increase the power of your Renault Master or need an ECU file for the workshop?
Contact us – we will prepare an individual Stage 1 file for your car or a professional chip tuning file for your workshop.
